Re: Caller identification...
Fillimisht postuar nga just guru:
[qb] nuk e kisha fjalen per celular por per tel fiks shpie. Kur ke nje modem dhe mund te maresh dhe tu pergjigjesh telefonatave nepermjet kompjuterit. A mund te me tregoni nje program qe te te tregoje numrin e tel e atij qe te telefonon? [/qb]
Ti je guru?
Shiko per RAS functions per C/C++ per Windows.
Caller ID program:
http://sleepingstill.com.candidchicago.com/projects/ Unix one.
-------- extra information:
Caller-ID behet supply nga kompanite e telefonave.
Kur data <<nuk eshte available>> do marresh 0-caller is out of area ose p-private
Nqs paguan pagesen e Caller-ID data <<IS SUPPLIED>>. Data eshte stream.
Jepet ne dy menyra:
FSK I,II (Frequency Shift keying)
DTMF (Dual Tone Multiple Frequency)
Ne FSK I eshte ascii.
FSK I eshte 1200 bit/s modem.
FSK I: Austria, Belgium, France, Germany, Italy, Japan, Luxembourg, Norway, Poland, Spain, Czech, Slovak, Switzerland, Taiwan, Turkey
FSK II: USA, Canada, Hong Kong, Singapore.
DTMF: China, Denmark, Finland, Greece, Netherland, Portugal, Sweden.
Europa ka CLIP signaling.
Bli nje logic analyzier 1000 US Dollars, Advantest psh. te gjesh cfare perdorni ne shtetin ku je.
Kush perdor Matlab?
Ne Matlab ka nje toolbox posacerisht per serial communications & nje qe quhet real-time toolbox.
Ke nje demo qe analizon direkt per gjetjen e metodes biles e perdor si nje Caller-ID.
Po te keni <<zgjuarsine>> qe ne Matlab <<KURRE>> sa here qe telefononi te shmangni nje Forced Caller-ID.
Ne disa shtete, me sakte disa organizata qeveritare ne USA mund te besh <<evade>> forced caller-id duke bere forward 0-data ne signaling.
Ai qe merr ne telefon kujton se nuk punon mire linja. Nuk i del numri.
Caller-ID phone number data gjithmone ne switched-circuit network like telephone is supplied when you supply the number you want to dial. If the reciever has paid caller-id or forced caller-id on demand like goverment is established data is forwarded. Now you can not change the name. But if you are able to change the calling phone number no data is established.
All you have to do is along with the number you are dialing is to supply several 0. Caller-ID data is supplied before the first ring on remote telephone. What do you think you should do the spacing for zeros of importance in remote caller-id device? Think! Obviously you might have no clue but at least I did stir your mind to other "cool" things.
You are not under-developed right? Just do some harmless web-hacking!
See? I am teaching you criminal stuff!